HID

The HID EdgePlus IP Access Solution puts control and user interface right at the door. The EdgePlus Solo ES400 is a cost-effective, stand-alone, single-door IP access control solution. This easy-to-use solution enables remote management and report generation via standard web browser. User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. Providing "Intelligence at the Door", the flexible EdgePlus Solo ES400 offers a wide choice of card reader compatibility. And the EdgePlus Solo ES400 IP Access Solution can be converted from stand-alone operation to a system reader for a host environment quickly and easily through the web browser. There is never a need to go to the door.

With a separately connected reader, EdgePlus is a perfect solution for migrating existing reader installations to the "edge" of the network. Whether the enterprise is iCLASS, Prox, FlexSmart, FlexPass, MIFARE/DESFire, CRESCENDO?, or Wiegand output reader, EdgePlus delivers Intelligence at the Door.

• True Flexibility - Provides network connectivity for any existing or new Wiegand or compatible HID Clock and Data readers
• Management - Remotely managed over the network via standard web browser
• Real Cost Savings - Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies
• Established Open Architecture - Built on the HID OPINTM platform, can be remotely reconfigured to a system reader in a host environment

• Embedded User Interface, no external software requirement
• Remotely managed via standard web browser
• Works within DHCP or Static IP networks for plug and play installation
• "Door Dashboard" accesses door commands, status, alarms, and recent events from all screens
• Back-up and restore of data from user PC
• Built-in diagnostics
• Installer "calling card" allows inclusion of contact information for user support
• User upgradable firmware
• Built-in help screens
• Manages 1000 cardholders/credentials
• Manages 8 schedules and 3 intervals each day of the week including holidays
• View last 5000 events
• Standardized report generation, including CSV export
• Built-in 802.3af Power over Ethernet (PoE), with 600 mA available for external field devices and locking hardware
• Easily migrates to a host based system - (OEM OR CS)
  After upgrade:
  • 40,000 credentials
  • 65000 Schedules
  • Full Edge/VertX? capacities
• Wet or Dry door relays
• Permits local laptop computer connections for diagnostics and configuration

Dimensions 3.3" W x 4.8" H x 1.5" D 83.8 mm x 121.9 mm x 36.3 mm)

Weight 6.8 oz (.195 kg)

Card Data Formats Supports any card data format up to 128 bits

Hardware 32-bit RISC CPU, 100 MHz processor

Memory 8 MB onboard Flash memory; 32 MB SDRAM; 256K SRAM

Visual Indicators Two LEDs indicate power/network activity and device I/O activity.

Power Supply Requirements 1 A @ 12-16 VDC maximum

Relays can be configured to supply power as follows:
Available Power: The E400 is capable of supplying a total of 700 mA to field devices. This power may be shared between a reader and one or two additional field devices. Unpowered, relay contacts are rated for 2 A @ 30 VDC The ES400 is intended for use in indoor environments that comply with the following specifications:

Operating Temperature 32° to 122° F (0° to 50° C)
Operating Humidity 5% to 95% relative, non-condensing
Communication Ports Ethernet  10 or 100 Mbps
Reader - Wiegand, HID Clock and Data

Certifications UL 294 and UL 1076 Listed Component for the US pending, CSA 205 for Canada, FCC Class B Verification, EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan

Warranty Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).