HID Proximity - Readers

ThinLine II 5395
How To Purchase
If you would like to order our products download our easy to use How To Order Guide.
Download

Get More Information
ThinLine II 5395
125 kHz Proximity Wall Switch Reader
Overview Key Features Specifications
Providing performance and reliability, HID's attractive, unobtrusive ThinLine II proximity card reader is housed in a two-piece, weatherproof secure potted enclosure.
  • The size of most standard U.S. switch plates.
  • Available with Wiegand or Clock-and-Data interface.
  • Potted reader suitable for indoor or outdoor use.
  • Base part numbers: 5395 (Wiegand), 5398 (Clock-and-Data).
  • 18" (45 cm) wire pigtail standard; consult factory for 9' (2.7 m) pigtail available by special order.
  • Easily installed and maintained with the use of replaceable covers.
  • Available with a Wiegand or Clock-and-Data interface.
  • Provides high reliability, consistent read range and low power consumption.
  • Features include multicolor LED and internal control or host control of the LED and beeper.
  • Mounts directly on metal with minimal impact on the read range performance.
  • Aesthetic design available in two cover designs and four colors to match any décor.
  • Includes multilingual installation manual.
Typical maximum* read range
ProxCard® II Card - up to 5.5" (14 cm)
ISOProx® II Card - up to 5" (12.7 cm)
DuoProx® II Card - up to 5" (12.7 cm)
Smart ISO/DuoProx™ Cards - up to 5" (12.7 cm)
Proximity & MIFARE™ Card - up to 5" (12.7 cm)
ProxCard® Plus Card - up to 1.5" (3.8 cm)
ProxKey® II Keyfob - up to 2" (5.1 cm)
Microprox® Tag - up to 3" (7.6 cm)

*Depending on local installation conditions.

Dimensions
4.70" x 3.00" x 0.68" (11.9 x 7.6 x 1.7 cm)

Power Supply
5-16 VDC
Linear power supplies are recommended.

Current Requirements
Average: 30 mA (5 VDC); 20 mA (12 VDC)
Peak: 110 mA (5 VDC); 115 mA (12 VDC)

Operating Temperature
-22° to 150° F (-30° to 65° C)

Operating Humidity
0-95% relative humidity non-condensing

Weight
3.3 oz. (94 gm)

Cable Distance
Wiegand interface: 500 feet (150 m)
Clock-and-data interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.

Certifications
Canada/UL 294 Listed
FCC Certification, United States
Canada Certification
EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
Fifteen EU Countries under the R&TTE Directive (EN300 330 - SRD, and ETS 300 683 - EMC)
CE Mark
Australia C-Tick, New Zealand
Taiwan, China