HID® EDGE® EDGEPlus® Solo ES400 83000

RequestInformation
IP intelligence at the door
This product has been discontinued. View end-of-life status for HID Global products. Here is its replacement product: HID® EDGE EVO® Solo ESH400-K Networked Controller
Overview | Specifications

The HID EDGEPlus® IP Access Solution puts control and user interface right at the door.

The EDGEPlus Solo ES400 is a cost-effective, stand-alone, single-door IP access control solution. This easy-to-use solution enables remote management and report generation via standard web browser. User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. Providing "Intelligence at the Door", the flexible EDGEPlus Solo ES400 offers a wide choice of card reader compatibility. And the EDGEPlus Solo ES400 IP Access Solution can be converted from stand-alone operation to a system reader for a host environment quickly and easily through the web browser. There is never a need to go to the door.

With a separately connected reader, EDGEPlus is a perfect solution for migrating existing reader installations to the "edge" of the network. Whether the enterprise is iCLASS, Prox, FlexSmart, FlexPass, MIFARE/DESFire, CRESCENDO?, or Wiegand output reader, EDGEPlus delivers Intelligence at the Door.

  • True Flexibility - Provides network connectivity for any existing or new Wiegand or compatible HID Clock and Data readers
  • Management - Remotely managed over the network via standard web browser
  • Real Cost Savings - Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies
  • Established Open Architecture - Built on the HID OPINTM platform, can be remotely reconfigured to a system reader in a host environment
Overview | Specifications

Dimensions: 3.3" W x 4.8" H x 1.5" D (83.8 mm x 121.9 mm x 36.3 mm)

Weight: 6.8 oz (.195 kg)

Card Data Formats: Supports any card data format up to 128 bits

Hardware: 32-bit RISC CPU, 100 MHz processor

Memory: 8 MB onboard Flash memory, 32 MB SDRAM, 256K SRAM<

Visual Indicators: TTwo LEDs indicate power/network activity and device I/O activity.

Power Supply Requirements: 1 A @ 12-16 VDC maximum

    • Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af ) enabled network devices.
    • Alternate: Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
    • Relays can be configured to supply power as follows:
      • Available Power: The EdgeReader is capable of supplying a total of 600 mA to field devices. Unpowered, relay contacts are rated for 2 A @ 30 VDC
      • Note: Use of a Listed Access Control / Burglary power-limited power supply is required for all Listed installations.

Operating Temperature

    • 32° to 122° F (0° to 50° C)

Operating Humidity

    • 5% to 95% relative, non-condensing

Communication Ports

      • Ethernet 10 or 100 Mbps
      • Reader Two LEDs indicate power/network activity and device I/O activity.

Certifications:

    • UL 294 Listed Component for the US, CSA 205 for Canada, FCC Class A Verification, ICES-003 Class A Canada, EU (CE Marking), Australia (C-Tick Mark), New Zealand

 

Overview | Specifications