Products
This product has been discontinued . View end-of-life status for HID Global products .
Here is its replacement product: HID® EDGE EVO® Solo ESH400-K Networked Controller

HID® EDGE™ EDGEPlus Solo ES400 83000

IP intelligence at the door
HID EDGE EDGEPlus Solo ES400 83000
Overview
Specifications

The HID EDGEPlus IP Access Solution puts control and user interface right at the door.

The EDGEPlus Solo ES400 is a cost-effective, stand-alone, single-door IP access control solution. This easy-to-use solution enables remote management and report generation via standard web browser. User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. Providing "Intelligence at the Door", the flexible EDGEPlus Solo ES400 offers a wide choice of card reader compatibility. And the EDGEPlus Solo ES400 IP Access Solution can be converted from stand-alone operation to a system reader for a host environment quickly and easily through the web browser. There is never a need to go to the door.

With a separately connected reader, EDGEPlus is a perfect solution for migrating existing reader installations to the "edge" of the network. Whether the enterprise is iCLASS, Prox, FlexSmart, FlexPass, MIFARE/DESFire, CRESCENDO?, or Wiegand output reader, EDGEPlus delivers Intelligence at the Door.

  • True Flexibility - Provides network connectivity for any existing or new Wiegand or compatible HID Clock and Data readers
  • Management - Remotely managed over the network via standard web browser
  • Real Cost Savings - Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies
  • Established Open Architecture - Built on the HID OPINTM platform, can be remotely reconfigured to a system reader in a host environment

Dimensions: 3.3" W x 4.8" H x 1.5" D (83.8 mm x 121.9 mm x 36.3 mm)

Weight: 6.8 oz (.195 kg)

Card Data Formats: Supports any card data format up to 128 bits

Hardware: 32-bit RISC CPU, 100 MHz processor

Memory: 8 MB onboard Flash memory, 32 MB SDRAM, 256K SRAM<

Visual Indicators: TTwo LEDs indicate power/network activity and device I/O activity.

Power Supply Requirements: 1 A @ 12-16 VDC maximum

  • Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af ) enabled network devices.
  • Alternate: Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
  • Relays can be configured to supply power as follows:
    • Available Power: The EdgeReader is capable of supplying a total of 600 mA to field devices. Unpowered, relay contacts are rated for 2 A @ 30 VDC
    • Note: Use of a Listed Access Control / Burglary power-limited power supply is required for all Listed installations.

Operating Temperature

  • 32° to 122° F (0° to 50° C)

Operating Humidity

  • 5% to 95% relative, non-condensing

Communication Ports

  • Ethernet 10 or 100 Mbps
  • Reader Two LEDs indicate power/network activity and device I/O activity.

Certifications:

  • UL 294 Listed Component for the US, CSA 205 for Canada, FCC Class A Verification, ICES-003 Class A Canada, EU (CE Marking), Australia (C-Tick Mark), New Zealand
Documents