HID Prox80® 5405

125kHz Europe & Asia Back Box Sized Proximity Reader
This product has been discontinued. View end-of-life status for HID Global products.
Overview | Specifications

HID's Prox80® reader is an 80 mm (3.15") square reader designed to mount directly to European and Asian size single-gang electrical back boxes. With a three-piece, weatherproof potted enclosure and long pigtail (2.7 m / 9 ft) design, the Prox80 is easily installed and provides up to 14 cm (5.5") of read range.

Key Features

  • Unique mounting plate accommodates vertical and horizontal mounting hole patterns (60 mm) and Asian (52 mm) hole spacing.
  • The long pigtail (2.7 m or 9 ft) simplifies installation by providing easy cable terminations, and increases reliability by reducing the number of cable joins.
  • Multilingual installation manual supports field personnel in the proper installation of the reader.
  • Available in a grey or white Classic Series cover design with a Wiegand or Clock-and-Data interface.
  • Provides high reliability, consistent read range and low power consumption.
  • Features include multicolor LED and internal control or host control of the LED and beeper.
  • Mounts directly on metal with minimal impact on the read range performance.
  • Can be used with all HID proximity cards and all bit formats.
Overview | Specifications

Typical Maximum Read Range*
ProxCard® II card - up to 5.5" (14 cm)
ISOProx® II card - up to 5" (12.5 cm)
DuoProx® II card - up to 5" (12.5 cm)
ProxKey® II keyfob - up to 2" (5 cm)
MicroProx® Tag - up to 2.5" (6.2 cm)
ProxCard® Plus card - up to 1.5" (3.7 cm)
Smart ISO/DuoProx® cards - up to 2.5" (6.2 cm)
Proximity & MIFARE® card - up to 5" (12.5 cm)

*Depending on local installation conditions.

Dimensions
3.15" x 3.15" x 0.80" (8.0 x 8.0 x 2.0 cm)
Screw slots provided for 52-60mm hole spacing

Power Supply
5-16 VDC
Linear power supplies are recommended.

Cable Distance
Wiegand interface: 500 feet (150 m)
Clock-and-data interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.

Current Requirements
Average: 30 mA (5 VDC); 20 mA (12 VDC)
Peak: 110 mA (5 VDC); 115 mA (12 VDC)

Operating Temperature
-22º to 150º F (-30º to 65º C)

Operating Humidity
0-95% relative humidity non-condensing

Weight
2.2 oz. (63 gm)

Certifications
CE Mark
Australia C-Tick, New Zealand
EU and CB Scheme Electrical Safety (EN60950 and IEC60950 ITE Electrical Safety)
Fifteen EU Countries under the R&TTE Directive (EN 300 330 - SRD, and ETS 300 683 - EMC)
Canada/UL 294 Listed
Canada Certification
FCC Certification, United States

Overview | Specifications