HID EDGE EVO EHR40-L Controller/Reader & Module

Interface to a Standard Door Lock
EHR40-L Access Controller / Reader & Module

The EDGE EVO® EHR40-L Controller/Reader and Interface Module is a single-door access control panel and with combined reader and a separate single-output lock interface that enables cost effective installation and simple door control. The solution provides control to lower security doors as it does not monitor door position or requests to exit. The controller/reader is installed at the door.

Additional highlights:

  • The Hi-O Interface Module (ELM) is mounted within a single-gang box or within a hollow door frame, allowing for easy wiring of IP to reader and strike to reader.
  • The controller/reader and module are connected using the secure Hi-O bus and an additional Hi-O iCLASS® reader can be attached to the EHR40-L controller/reader's Hi-O bus for in/out reading.
  • The EHR40-L also offers interface to 13.56 MHz compliant credentials, including iCLASS.
  • Model (and Part #): EHR40-L (82120CKL0001A)
  • Mounting Holes - EHR40: US Single-gang and EU / APAC 60mm
  • Mounting Holes - ELM: Fits within US Single-gang or in hollow door frame
  • Dimensions - EHR40: 3.3" W x 4.8" H x 1.2" D (83.9 mm x 122.2 mm x 30.5 mm)
  • Dimensions - ELM: 2.9" W x 1.3" H x 0.7" D (73.0 mm x 32.0 mm x 19.0 mm)
  • Weight - EHR40: 6.3oz (180g)
  • Weight - ELM: 4.9oz (140g)
  • Operating Temperature: 32° to 122° F (0° to 50° C)
  • Operating Humidity: 5% to 95% relative, non-condensing
  • Communication Ports: Ethernet (10/100), Hi-O CANbus
  • 13.56 MHz Card Compatibility: 13.56 MHz iCLASS HID Application, ISO14443A CSN
  • Warranty: Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).
  • DC Input (MAX) @ PoE: 14.4W (300mA @ 48VDC)
  • DC Input (MAX) @ AUX +12VDC: 18W (1500mA @ 12VDC)
  • DC Input (MAX) @ AUX +24VDC: 36W (1500mA @ 24VDC)
  • Supervised Inputs Power (MAX): 0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref
  • DC Input @ PoE: 8W
  • DC Input @ AUX +12VDC: 13.1W
  • DC Input @ AUX +24VDC: 26.6W
  • Hi-O CANbus Output Voltage, DC Input = PoE: 24VDC
  • Hi-O CANbus Output Voltage, DC Input = AUX: AUX +VDC